Xpress Seal Dry is used whenever there is a concern that there is moisture in the system and now it is easier to add than ever with the first ever direct inject CO2 gun and Xpress Seal Dry injector tube. No more need for time consuming hook ups. Xpress Seal Dry is far less expensive at removing moisture than through traditional mechanical methods.
Xpress Seal Dry’s concentrated formula contains agents that convert moisture in the A/C system into a compatible synthetic oil that mixes with the existing oil in the system. When used, Xpress Seal Dry can prevent acid build up and compressor corrosion that could lead to system failure. Xpress Seal Dry can also be used prior to injecting Xpress Seal into the system to insure all of the moister has been removed. Moisture in a system also robs it of cooling capacity.
Perfect for split system, heat pumps, microchannel coils, packaged units, and mini splits. One Xpress Seal Dry injector tube can be used for units up to 5 ton.
Xpress Seal Dry is fully compatible with mineral, PAG, and ester oils. (Excluding ammonia)
With Vapco’s CO2 direct inject system;
No need to pump down R-410A units.
No need for manifold gages.
No injection hose or caulk gun needed.
12+ injections per CO2 cartridge
If the system has not leaked all the way to zero, moisture and air should not be in the system. However, when in doubt, use Xpress Seal Dry.
Made in the U.S.A.
Xpress Seal Dry
Xpress Seal Dry up to 5 tons
Comes 6 per case.